Not yet rated Add your review
Free shipping to continental USA!
What's in the box:
|Quantity in Package||Single|
|Connector Type||Spring post|
|Cutout Size||9.9375 x 28.0|
|Power Range ( Watts )||25-200|
|Impedance ( Ohms )||8|
|Parts Warranty||5 Years|
|Labor Warranty||5 Years|
3-Way Driver Design: The Bowers & Wilkins CWM7.3 S2 utilizes a three-way driver design with a 1" Carbon dome tweeter, one 4" Continuum FST cone midrange driver, and two 6" Aerofoil Profile bass woofers for full-range sound. The 1" Carbon dome tweeter delivers pinpoint imaging accuracy and detail, while the 5" Continumm FST cone midrange driver provides a natural and open midrange sound. The two 6" Aerofoil Profile bass woffers deliver deep, dynamic, and accurate bass response.
Flowport Technology: The B&W in-wall speaker has a critically formed baffle box constructed from glass reinforced ABS, plus its own integrated back box for accurate, detailed sound. It also utilizes B&W's Flowport technology with a front-firing port to create to create smooth, deep, and efficient bass response from a compact in-wall loudspeaker. Its front-firing, dimpled flared port provides natural bass response without turbulent noise or distortion.
Note: You can adjust the in-wall speaker's low-frequency performance by using the supplied foam plug. The foam plug is two-pieces, allowing for a degree of fine-tuning using either the outer, larger-diameter piece in isolation or the two parts together. Using solely the outer, larger-diameter foam piece will deliver less bass attenuation than the complete foam plug assembly.
Spring-Post Terminals: The B&W CWM7.3 S2 in-wall loudspeaker is outfitted with spring-post terminals that will accommodate bare speaker wire ( up to 12AWG ), pin connectors, and banana plugs ( single only ).
Magnetic & Paintable Grilles: The Bowers & Wilkins CWM7.3 S2 in-wall loudspeaker includes easy-to-install magnetic grilles that are also paintable. The grille protrudes 0.3125" from the wall.
In-Wall Installation: The B&W CWM7.3 S2 requires a rectangular cutout and is secured in the wall via the included mounting frame with integrated "QuickDogs" spring-loaded clamps that tighten using phillips-head screws. The cutout will need to measure 9.9375" ( w ) x 28" ( h ) x 4.0625" ( d ). Make sure there is a least 0.75" of clearance around the cutout opening for the integrated "QuickDogs" clamps. The mounting clamps will accommodate 0.25" to 1.25" thick drywall. The included baffle box attaches to the to or bottom of the in-wall speaker and measures 8.5625" ( w ) x 18.0625" ( h ) x 2.5" ( d ). Make sure there is enough room inside the cavity of the wall for the included baffle box.
Note: Before installing the CWM7.3 S2 in-wall speaker, you should ensure that the ceiling location chosen is free of obstructions such as pipe work, ducting or wiring that will interfere with the installation. In existing drywall construction, use a stud-finding tool to help you map the ceiling construction and a pipe detector to scan the proposed installation location.
Applications: Designed for in-wall use, the B&W CWM7.3 S2 can be used as a front, center, or rear channel speakers in a home theater system. It can also be used in a 2-channel stereo application.
- Try to avoid corner locations for any of the speakers and to ensure that the acoustic environment around each speaker is similar.
- The nature of the installation of in-wall speakers means that it is sometimes impractical to locate them in the acoustically ideal positions. In these cases they should be located as close as is practical to the ideal positions.
Are you an audiophile on a budget? If you check out via PayPal, you have the option offered at PayPal checkout! ( Free to sign-up & free account ).
Or contact us to inquire how you can finance your purchase through our partner, ( Synchrony ).