PP 4 VinylStudio Lite
The PP 4 (or the older PP 3) comes with Mac & PC compatible version of AlpineSoft’s VinylStudio Lite ripping software is included with your new PP-4. With VinylStudio Lite you can:
- Rip LPs into WAV files
- Split Tracks
- Burn CDs
- Record Disks
- Look up Song Titles
- Handle File Management
Specifications
Moving Coil
- Input Impedance (R & C): 100 Ohm + 180pF
- Gain at 1kHz: 58 dB
- Input sensitivity (ref. 200mV output): 0.38mV
- Signal to noise (A weighted, with cartridge connected): 78 dB
- Input overload (20Hz/1kHz/20kHz): 0.65/6.5/60mV
- Rated Distortion (THD 20Hz – 20kHz): <0.03%
- RIAA response accuracy: ±0.3 dB
- Infrasonic filter:
-14 dB (5 Hz)
-3 dB (10 Hz) - Digital output (USB): 16 bit linear PCM
- Sampling frequency: 48 kHz
- Dynamic range: 86 dB
Moving Magnet Input
- Input Impedance (R & C): 47 kilohm + 200pF
- Gain at 1kHz: 35 dB
- Input sensitivity (ref. 200mV output): 5mV
- Signal to noise (A weighted, with cartridge connected): 76 dB
- Input overload (20Hz/1kHz/20kHz): 10/100/900mV
- Rated Distortion (THD 20Hz – 20kHz): <0.03%
- RIAA response accuracy: ±0.3 dB
- Infrasonic filter:
-14 dB (5 Hz)
-3 dB (10 Hz) - Digital output (USB): 16 bit linear PCM
- Sampling Frequency: 48 kHz
- Dynamic range: 89 dB
- Record Level: 0 dB to -6 dB
- Gross dimensions excl. power supply (W x H x D):
135 mm x 49 mm x 72 mm
5 5/16" x 1 15/16" x 2 7/8″
Line In
- Input Impedance: 47 kilohm + 180pF
- Rated Distortion (THD 20Hz – 20kHz): <0.008%
- Signal to noise, A weighted: -115 dB
- Maximum Input Level: 5.3V
Line Out
- Output Impedance: 100 Ohm
- Maximum Output Level: 5.3V